NATURE'S INSTRUMENTS NI-PG-705-01 Quick Start Manual

COMPONENTS
NATURE'S INSTRUMENTS NI-PG-705-01 2616 x 2406mm [103" x 95"] OAK-SLAB PICNIC TABLE.
INCLUDES 8 LAG BOLTS INSTALLED IN THE BOTTOM OF THE TABLE.
NOTE: THE LAG BOLTS WILL BE SCREWED IN FLUSH WITH THE WOOD SURFACE (FOR SHIPPING) AND WILL REQUIRE
ADJUSTMENT PRIOR TO INSTALLATION.
4 PAVING STONES, MAX. 51 mm [2"] THICK, MIN 305mm [12"] WIDE, ARE NOT SUPPLIED.
NOTES
1. PICNIC TABLE IS CONSTRUCTED FROM SLABS OF SOLID
OAK AND WEIGHS APPROX. 2,500 LBS.
2. PLACEMENT OF PICNIC TABLE TO ALLOW FOR
CIRCULATION; IT IS RECOMMENDED THAT AT LEAST
915mm [36"] CLEAR SPACE BE ALLOCATED AROUND ALL
SIDES OF THE TABLE. 1220 mm [48"] CLEAR SPACE IS
PREFERRED.
3. PLACE PAVING STONES ON FIRM STABLE GROUND.
4. PARTIALLY UNSCREW THE LAG BOLTS ON THE BOTTOM
OF THE TABLE SO THEY EXTEND 13 - 25 mm [
BEYOND THE WOOD SURFACE.
PICNIC TABLE TOP
PICNIC TABLE SEAT
ADJUSTABLE
LAG BOLT
PAVING STONE
REFER TO LAYOUT
FOR ADJACENT
MATERIALS
OAK-SLAB PICNIC TABLE
N
s
INSTRUMENTS
FOR YOUR PLAYGROUND
1
" - 1"]
2
DETAIL
OAK SLAB PICNIC TABLE
PRODUCT NUMBER PAGE
NI-PG- 705-01 1 OF 1
5. PLACE TABLE ON THE PAVING STONES SO THAT THE
EXTENDED BOLTS ARE CENTRED OVER THE PAVING
STONES.
6. IF THE PICNIC TABLE IS NOT LEVEL AND STABLE,
ADJUST THE LENGTH OF THE LAG BOLTS.
7. FOLLOW ADJACENT SURFACING INSTALLATION DETAILS.
RESTORE ADJACENT SURFACING TO PRE-CONSTRUCTION
CONDITION UNLESS OTHERWISE SPECIFIED.
2616mm [8'-7"]
- FRONT SECTION -
2406mm [94 3/4"]
SCALE @ 8.5x11 DRAWN
N.T.S.
SE
- SIDE SECTION -
CHECKED PHONE NUMBER:
1-877-733-7459
SE