Bluetooth - Samsung 2022 A Series User Manual

Turn on Wi-Fi automatically:
Detect suspicious networks:
Show network quality info:
Wi-Fi power saving mode:
Network notification
Show Wi-Fi pop-up:
Manage networks:
Wi-Fi control history:
Hotspot 2.0: Connect automatically to Wi-Fi networks that support Hotspot 2.0.
Install network certificates:
Wi-Fi Direct
Wi-Fi Direct uses Wi-Fi to share data between devices. You can disconnect your device from a Wi-Fi Direct device if needed.
Swipe down from the top of the screen to open the Quick settings panel, and then tap the
1.
Tap Wi-Fi , and then tap the
2.
Tap More options (the three vertical dots), and then tap
3.
Select a device, and then follow the prompts to connect.
4.
To disconnect from a Wi-Fi Direct device, navigate back to Wi-Fi Direct and then select the device again.
5.

Bluetooth

You can pair your device to other
Once a pairing is created, the devices will remember each other and can exchange information without you entering the passkey again. You can
rename a paired device to make it easier to recognize, or unpair from a device if you no longer want to use it.
Connect to a Bluetooth device
Swipe down from the top of the screen to open the Quick settings panel, and then tap the
1.
Tap Bluetooth , and then tap the
2.
Your phone will begin scanning, and the other device should be placed in pairing mode. It may be necessary to tap
3.
device is ready so your phone will be able to find it.
Tap a device and follow the prompts to connect.
4.
Note: When sharing a file, tap the
To rename a paired device, tap the
5.
Enter a new name, and then tap
6.
To unpair from a device, tap the
7.
Note: When you unpair from a Bluetooth device, the two devices no longer recognize each other, and you will need to pair the device
again in order to connect to it.
Advanced options
Additional Bluetooth features are available in the Advanced menu. Keep in mind that certain options may vary by carrier.
Swipe down from the top of the screen to open the Quick settings panel, and then tap the
1.
Turn on Wi-Fi in frequently used locations.
Get notified when suspicious activity is detected on the current Wi-Fi network.
Display network information (such as speed and stability) in the list of available Wi-Fi networks.
Enable Wi-Fi traffic analysis to reduce battery usage.
or Wi-Fi notifications: Receive notifications when open networks are detected.
Alert me that Wi-Fi is available when opening apps.
View saved Wi-Fi networks and configure whether to auto reconnect to or forget individual networks.
View apps that have recently turned your Wi-Fi on or off.
Install authentication certificates.
switch to turn on Wi-Fi.
Bluetooth-enabled devices
switch to turn on Bluetooth.
Bluetooth icon to use this feature.
Settings icon (the gear) next to the device name, and then tap
Rename .
Settings icon next to the device name, and then tap
Wi-Fi Direct .
, like Bluetooth headphones or a Bluetooth-enabled vehicle infotainment system.
Settings icon. Tap Connections
Settings icon. From there, tap
Rename .
Unpair .
Settings icon. Tap Connections
.
Connections .
Scan when the other
, and then tap