Page 3
2. Pairing the smart bulb The AS90SB smart bulb must be turned into a lamp holder but first make sure the switch that switches the bulb is OFF. 1. Screw the smart bulb into an E27 (large fitting) lamp holder.
Page 4
12. Tap the small RGB balls to set the color and brightness of the smart bulb. 13. Here you can choose color mode and white light mode. 14. You can set the color by sliding the white circle to the desired color.
Page 5
-25°C ~ 45°C Dimable Indoors 4. DoC I, ELRO Europe, hereby declare that the radio equipment type AS90SB conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: www.elro.eu/compliance" Frequency: 433.9MHz Maximum transmitting power: 13dBm 5.
Need help?
Do you have a question about the AS90SB and is the answer not in the manual?
Questions and answers