Page 3
1. Introduction The smart plug can perform automatic commands. Think of lights and appliances switching automatically according to a schedule you set yourself. But you can also have connected lighting and appliances follow you when you change the status of the system. For example you turn on the alarm and with it lights and/or other devices.
Page 4
3. Automatic tasks 1. Go to the "System Settings" via the cogwheel. 2. Scroll down and choose "Smart Widget". 3. Select the "Automatic Tasks" feature. 4. Press the "+" to add an assignment. 5. Set the time that the automatic task should take place 6.
Page 5
11. The operation is successful, press OK to continue. 12. You will now see the label with the automatic command to power on. 13. Press the "+" and repeat steps 5 through 11 to make another automatic command for switching off. 4.
Page 6
5. Smart Follow SOS With the "Smart Follow SOS" function, you can switch the smartplug the moment a person is detected by, for example, a motion detector or door-window sensor when the system is switched on. 1. Select SOS and press the plus (+). 2.
Page 7
102 x 62.5 x 29.7 mm 7. DoC I, ELRO Europe, hereby declare that the radio equipment type AS90PLE conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: www.elro.eu/compliance"...
Need help?
Do you have a question about the AS90PLE and is the answer not in the manual?
Questions and answers