Table of Contents
Advertisement
Quick Links
HOLDING DISPLAY MERCHANDISER
For California Customers
WARNING: Cancer and Reproductive Harm -
5001766
5001766
www.P65Warnings.ca.gov
Model
Voltage
EDM-1K
110-120V ~
60Hz
EDM-1PT
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this WINCO® commercial equipment. WINCO takes pride in the quality of
its products. When used as intended and with proper care and maintenance, you will experience years of reliable
operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this
manual carefully. It's important to save these instructions for future reference.
SINGLE & DOUBLE DOOR
HEATED & HUMIDIFIED
Operating Instruction Manual
EDM-1K
Matte Black
(Single Door)
Power
Amperage
Plug Type
1500W
13.1A
NEMA 5-15P
COMMERCIAL
(Double Door)
Overall Dimensions
Length
Depth
Height
23-5/8"
25-3/8"
27-9/16"
(600mm)
(643mm)
(700mm)
23-5/8"
26"
27-9/16"
(600mm)
(659mm)
(700mm)
EDM-1PT
Red
Product
Weight
70 lbs
32 kgs
Advertisement
Table of Contents
Related Manuals for Winco EDM-1PT
Summary of Contents for Winco EDM-1PT
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO® commercial equipment. WINCO takes pride in the quality of its products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. -
Page 2: Introduction
Immediately Inspect for Shipping Damage All containers should be examined for damage before and during unloading. Congratulations on the purchase of your WINCO® equipment. Please The freight carrier has assumed responsibility for its safe transit and delivery. take the time to carefully read through this manual to ensure the... -
Page 3: Table Of Contents
• EDM-1PT: (3) Adjustable Shelves SAVE THE ORIGINAL BOX AND PACKAGING FOR USE IN WINCO prides itself on quality and service, ensuring that at the time of PACKAGING AND SHIPPING THE EQUIPMENT IF SERVICES packing, all products are supplied fully functional and free of damage. -
Page 4: Warnings
If there is ever uncertainty about a particular task or the proper method of operating this equipment, ask an experienced supervisor or contact Winco® for assistance. Warnings This manual contains a number of precautions to follow to help promote safe use of this equipment. - Page 5 ELECTRIC CODE, ALL LOCAL ELECTRIC CODES AND ORDINANCES, AND ALL THE LOCAL ELECTRICAL COMPANY RULES AND REGULATIONS. 6. The use of accessory attachments not recommended by WINCO Additionally, we recommend a 4" spacing surrounding the unit in may cause fire, electric shock or injury.
-
Page 6: Operation
Preparation (EDM-1PT) 1. Remove all the ties holding the shelves on the corners. Shelves may be installed in a flat or slant position. EDM-1PT Note: Please keep the Motor Switch in the "off" position Remove the ties holding when using flat shelves. - Page 7 Rack or optional round rack. four tiers on the round rack or optional flat rack. Removing the Round Rack (EDM-1K) Adjusting the Shelves (EDM-1PT) 1. Remove shelves and clips from the unit. Tools needed: Philips Head Screwdriver 2. Attach the shelf clips onto the desired position and lock onto the 1.
-
Page 8: Cleaning, Care & Maintenance
Do not wash parts in an automatic dishwasher. Ne jamais immerger l'appareil dans l'eau ni utilisez un jet d'eau pour le nettoyer. • If the power cord is damaged, it must be replaced by a WINCO® Approved Recommended Qualified Service Technician in order to avoid a hazard. -
Page 9: Food Holding Guide
HEAT & HUMIDITY CONTROLLED AIRFLOW KEEPS HOT FOODS FRESHER LONGER The air flow pattern of the EDM-1K and EDM-1PT by Winco® is designed to maintain consistent temperature and humidity around the food without drying, and enable the merchandiser to recover temperature quickly after opening/closing the door. -
Page 10: Troubleshooting
Troubleshooting If your WINCO commercial equipment does not operate, please check the following prior to placing a service call. PROBLEM POSSIBLE CAUSE RECOMMENDED SOLUTION Check that the power supply cord is correctly plugged in Power supply and outlet is working. -
Page 11: Service & Repair
Parts protected by the manufacturer or its agent are not to be adjusted by the installer, unless the installer is an authorized service agent. If you have any questions or problems DO NOT send unit to WINCO® without first contacting our customer service department. -
Page 12: Exploded Views
Exploded View MODEL: EDM-1K AND EDM-1PT... -
Page 13: Parts List
Parts List MODELS: EDM-1K AND EDM-1PT # Description Part # # Description Part # Left Feet (2 pcs) EDM1-P1 Switch (Power/Light/Motor) EDM2-P9 Right Feet (2 pcs) EDM1-P2 Switch for serial number EDM1-P9 EDM1K070000400 and below Water Heating Element EDM1-P28 Ballast... -
Page 14: Limited Warranty
Limited Warranty WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date, whichever date occurs first. - Page 15 WARRANTY SERVICE THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND DO NOT send unit to WINCO® without first contacting our customer SELLER. WINCO® NEITHER ASSUMES NOR AUTHORIZES ANY service department: 973-295-3899. PERSONS TO ASSUME FOR IT ANY OTHER OBLIGATION OR To initiate warranty service please visit our online portal: LIABILITY IN CONNECTION WITH SAID EQUIPMENT.
- Page 16 Models: EDM-1K and EDM-1PT www.wincous.com...
Need help?
Do you have a question about the EDM-1PT and is the answer not in the manual?
Questions and answers