Table of Contents
Advertisement
Quick Links
ROTATING HEATED & HUMIDIFIED
HOLDING DISPLAY MERCHANDISER
Model
Voltage
110-120V ~
EDM-1K
60Hz
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this WINCO® commercial equipment. WINCO takes pride in the quality of
its products. When used as intended and with proper care and maintenance, you will experience years of reliable
operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this
manual carefully. It's important to save these instructions for future reference.
Operating Instruction Manual
Power
Amperage
Plug Type
1500W
13.1A
NEMA 5-15P
COMMERCIAL
EDM-1K
Overall Dimensions
Length
Depth
Height
23-5/8"
25-1/4"
27-9/16"
(600mm)
(641mm)
(700mm)
Product
Weight
70 lbs
32 kgs
Advertisement
Table of Contents
Related Manuals for Winco EDM-1K
Summary of Contents for Winco EDM-1K
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO® commercial equipment. WINCO takes pride in the quality of its products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. -
Page 2: Introduction
Immediately Inspect for Shipping Damage All containers should be examined for damage before and during unloading. Congratulations on the purchase of your WINCO® equipment. Please The freight carrier has assumed responsibility for its safe transit and delivery. take the time to carefully read through this manual to ensure the... -
Page 3: Table Of Contents
3. Place the unit in the desired position and height. SAVE THE ORIGINAL BOX AND PACKAGING FOR USE IN WINCO prides itself on quality and service, ensuring that at the time of PACKAGING AND SHIPPING THE EQUIPMENT IF SERVICES packing, all products are supplied fully functional and free of damage. -
Page 4: Warnings
If there is ever uncertainty about a particular task or the proper method of operating this equipment, ask an experienced supervisor or contact Winco® for assistance. Warnings This manual contains a number of precautions to follow to help promote safe use of this equipment. - Page 5 ELECTRIC CODE, ALL LOCAL ELECTRIC CODES AND ORDINANCES, AND ALL THE LOCAL ELECTRICAL COMPANY RULES AND REGULATIONS. 6. The use of accessory attachments not recommended by WINCO Additionally, we recommend a 4" spacing surrounding the unit in may cause fire, electric shock or injury.
-
Page 6: Operation
Operation Water Fill Tank Fig.A Control Panel Fig.B 1. Plug in the power cord and turn on the power. NOTE: "LO H2O" will flash on the display until water has been added to water tank. Fig.C 2. CHANGE TEMPERATURE DISPLAY FOR EITHER FAHRENHEIT OR CELSIUS: • Remove the top cover (Fig. - Page 7 Removing the Round Rack Operation 3. SET AIR TEMPERATURE: Tools needed: Philips Head Screwdriver 1. Clean any food off the rack. • Press the air temperature button and the display will show “tSP”. It will then show adjustable temperature. 2. Using a Phillips Head screwdriver, unscrew the bolt at top of rack to disengage from the clutch assembly.
-
Page 8: Cleaning, Care & Maintenance
Do not wash parts in an automatic dishwasher. Ne jamais immerger l'appareil dans l'eau ni utilisez un jet d'eau pour le nettoyer. • If the power cord is damaged, it must be replaced by a WINCO® Approved Recommended Qualified Service Technician in order to avoid a hazard. -
Page 9: Food Holding Guide
COMMERCIAL ROTATING HEATED & HUMIDIFIED HOLDING DISPLAY MERCHANDISER HEAT & HUMIDITY CONTROLLED AIRFLOW KEEPS HOT FOODS FRESHER LONGER The air flow pattern of the EDM-1K by Winco® is designed to maintain consistent temperature and humidity around the food without drying, and enable the merchandiser to recover temperature quickly after opening/closing the door. EDM-1K FOOD HOLDING GUIDE MAXIMUM HOLD... -
Page 10: Troubleshooting
Troubleshooting If your WINCO commercial equipment does not operate, please check the following prior to placing a service call. PROBLEM POSSIBLE CAUSE RECOMMENDED SOLUTION Check that the power supply cord is correctly plugged in Power supply and outlet is working. -
Page 11: Service & Repair
Parts protected by the manufacturer or its agent are not to be adjusted by the installer, unless the installer is an authorized service agent. If you have any questions or problems DO NOT send unit to WINCO® without first contacting our customer service department. -
Page 12: Exploded Views
Exploded View MODEL: EDM-1K... -
Page 13: Parts List
Parts List MODEL: EDM-1K Description Part # Description Part # Left Feet EDM1-P1 Door Assembly EDM1-P20 Right Feet EDM1-P2 Controller EDM1-P21 Clip EDM1-P3 Water Level Sensor (Lower) EDM1-P22 O Ring EDM1-P4 Temperature Sensor (Inner) EDM1-P23 Inlet Pipe EDM1-P5 Water Level Sensor (Upper) -
Page 14: Limited Warranty
Limited Warranty WINCO® warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year. The labor warranty is one year from original installation or 18 months from actual factory shipment date, whichever date occurs first. - Page 15 Limited Warranty THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. WINCO® NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT. Examples of items not covered under warranty, but not limited to just these items: 1.
- Page 16 Model: EDM-1K www.wincous.com...
Need help?
Do you have a question about the EDM-1K and is the answer not in the manual?
Questions and answers