USB
Internal
Connectors
Back Panel
Connectors
I/O Controller
Hardware
Monitor
CPU:
-
1 x USB 3.2 Gen 2 Type-A port on the back panel
-
3 x USB 3.2 Gen 1 ports on the back panel
Chipset:
-
2 x USB 3.2 Gen 1 ports available through the internal USB header
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Chipset+USB 2.0 Hub:
-
4 x USB 2.0/1.1 ports on the back panel
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x CPU fan header
1 x CPU fan/water cooling pump header
3 x system fan headers
2 x addressable LED strip headers
2 x RGB LED strip headers
1 x M.2 Socket 3 connector
4 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x serial port header
1 x Clear CMOS jumper
1 x Q-Flash Plus button
1 x PS/2 keyboard/mouse port
1 x DVI-D port
1 x HDMI port
1 x USB 3.2 Gen 2 Type-A port
3 x USB 3.2 Gen 1 ports
4 x USB 2.0/1.1 ports
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks
iTE
I/O Controller Chip
®
Voltage detection
Temperature detection
Fan speed detection
Water cooling flow rate detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
- 8 -