Sanyo LCD-32XR9DKH Instruction Manual page 12

Connections
(Continued)
Connecting a Camcorder
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your TV, then press SOURCE button. The Input Source menu opens.
2. Press 5
or6 to select AV2, then press OK to confirm.
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder user manual.)
4. Insert the tape into the camcorder and press Play button.
Note
The operations of the camcorder may be different and is dependent on your model. Please read the user manual of your camcorder
to confirm operation.
Connecting a VCR (for Recording)
AV OUT
AV1 IN
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
To record program
1. Turn on your TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
Note
Only analog TV programs and AV input source can be output through the AV output jacks.
!
TV SIDE
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
TV REAR
RF RS-232
S-VIDEO
Cables are often colour-coded
to connectors. Connect red to
red, white to white, etc.
VIDEO
AV cable
10
L AUDIO R
Camcorder
VCR for Recording
S-VIDEO