Table of Contents
Advertisement
Home Connect
en
Turn the programme selector to
3.
position 6.
—˜š (update) will appear on the
display.
(Start/Pause) A will flash if a software
update is available.
Press (Start/Pause) A.
4.
¢"à (yes) will appear on the display.
Press (Start/Pause) A to confirm.
5.
Update installation will now start. This
process may take several minutes. Do
not switch the appliance off while
updates are being installed.
Press Remote Start } briefly to exit
6.
the Home Connect settings.
38
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure data connection).
The current software and hardware
■
version of your household appliance.
Status of any previous resetting to
■
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Ensure that the Home Connect
Note:
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
BSH Hausgeräte GmbH hereby
declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 1999/5/EC.
A detailed R&TTE Declaration of
Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
Advertisement
Table of Contents
