Exiting Setting Mode - Bosch WTWH75P9SN Installation And Operating Instructions Manual

Switch on the appliance.
1.
Turn the programme selector to
2.
position 1.
Press (Adjust drying level) ó and,
3.
at the same time, turn the
programme selector to position 2.
Release (Adjust drying level) ó.
4.
Setting mode is now activated.
Changing the audible signal volume
You can adjust the volume of audible
notification signals (that indicate that a
programme has ended, for example)
and audible button signals by turning
the rotary selector to the following
positions:
2: Audible notification signal volume
■
3: Audible button signal volume
■
Activate setting mode.
1.
Turn the programme selector to the
2.
required position.
Use the (Ready in) ñ + or – button
3.
to set the volume you require (0 =
off; 4 = very loud).
Appliance settings
Switching the automatic switch-off
function on/off
If the appliance is not used for an
extended period, it may automatically
switch itself off until a programme starts
or when a programme has ended in
order to save energy.It can be switched
back on again at any time by pressing
#.
You can switch the appliance's
automatic switch-off function on or off
as follows:
Activate setting mode.
1.
Turn the programme selector to
2.
position 4.
Use the (Ready in) ñ + or – button
3.
to switch the appliance's automatic
switch-off function on or off.
If Wi-Fi is switched on on the
Note:
appliance, when it is in Energy saving
mode, the appliance will not
automatically switch itself off.

Exiting setting mode

Once you have applied all the settings,
press # to switch off the appliance.
The settings you have selected will be
saved and will take effect the next time
the washing machine is switched on.
en
17