Advertisement
Assembly
1
Assembling the table shelf to the
legs
Place the table shelf (B) upside down so the
pre-drilled holes are visible.
Attach the table shelf (B) to the three legs (C) by
inserting bolts (AA) with metal washers (BB) through
the holes on the inside of the legs.
Lossely tighten with the allen wrench (CC).
IMPORTANT:
attached and initially tightened only a few revolutions.
Then tighten further, one at a time, alternating between
the three legs. Do not fully tighten one leg before all
bolts are attached.
B
3
Placing the glass top
Turn the table in the upright position, carefully place
the glass top (D) onto the frame.
Your table is now ready for use, so relax & enjoy!
Each of the three leg bolts should be
AA
BB
2
Attaching the table legs to the
table top rim
Place the table top rim (A) upside down so the
pre-drilled holes are visible.
Attach the three table legs (C) to the table top rim
(A) by inserting the bolts (AA) with metal washers
(BB) through the pre-drilled holes.
Do not fully tighten one bolt before you attach
them all.
Tighten all the bolts using the allen wrench (CC).
C
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
B
D
HAMPTONBAY.COM
C
AA
BB
Advertisement
