Advertisement
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve "H 99"
error code. Consult an authorised dealer.
• Before cleaning, switch off the power
supply and unplug the unit.
• Do not touch the aluminium fi n as the sharp
parts may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use soap ( pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Do handle the unit surface
with care to avoid scratches
by sharp or rough items (e.g.
fi ngernails, tools, rings, etc).
Wipe the unit gently with a soft
damp cloth.
The coils and fans should be cleaned
periodically by an authorised dealer.
Front panel
Wash gently and dry.
How to remove front panel
Raise up.
1
Close it securely
Hold horizontally.
1
Close down.
3
Press both ends and center of the front
4
panel.
Indoor unit
Front panel
Outdoor unit
Clean the debris that surround
the unit.
Clear any blockage from the
drain pipe.
nanoe
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
A
with water to avoid damaging
the surface.
B
• Dry the fi lters thoroughly under a shade,
away from fi re or direct sunlight.
Slide the front
2
• Replace any damaged fi lters.
panel to right
and pull
A
Remove air fi lter
out
.
B
Match and
2
Remove from the unit
push in.
Aluminium fi n
Air fi lters
nanoe
-G Generator
TM
Attach air fi lter
Insert into the unit
-G Generator
TM
33
Advertisement
