Table of Contents
Advertisement
TINT
You can adjust the skin tone in the projected image.
More
reddish
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
SHARPNESS
You can adjust the sharpness of the projected image.
Less
sharp
Setting range is vary according to the selected input
signal
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Less
bluish
Setting range: -6 to +6
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and
the lens iris on/off.
• ON:
Automatic adjustment
• OFF:
No adjustment
LIGHT HARMONIZER
LUMINANCE SENSOR detects the brightness of the
room and keeps the luminance in balance
automatically. If needed, you can switch on/off this
function or adjust it manually. Press I H to cycle
through the options.
LIGHT HARMONIZER
MODE
MANUAL ADJUST
• OFF
No adjustment
• AUTO:
Automatic adjustment
• MANUAL: Manual adjustment (0 - +8)
NOTE:
More
greenish
From the ADVANCED MENU, you can perform more
detailed image adjustment manually.
More
sharp
Less
reddish
AUTO
PICTURE Menu
To assure correct performance of the LIGHT
HARMONIZER, do not interrupt the light onto the
LUMINANCE SENSOR.
ADVANCED MENU
GAMMA
You can adjust linear intensity at 3 levels. Press
I H to increase/decrease.
Levels
GAMMA HIGH
GAMMA MID
GAMMA LOW
Setting range: -8 to +8
CONTRAST
You can adjust the amount of contrast in RGB
colors individually. Press I H to
increase/decrease.
RGB
CONTRAST R
CONTRAST G
CONTRAST B
Setting range: -16 to +16
BRIGHTNESS
You can adjust the brightness in RGB colors
individually. Press I H to increase/decrease.
RGB
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
Setting range: -16 to +16
COLOR MANAGEMENT
You can manage your own defined color settings.
See "Setting your own color profile" on page 24.
Default setting
0
0
0
Default setting
0
0
0
Default setting
0
0
0
E
- 29
NGLISH
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
