Table of Contents
Advertisement
About Your Projector
Projector
Top and front view
Illuminates or flashes to
indicate the status of the
projector. (page 19)
POWER
Turn the POWER on/off.
(page 19)
POWER
Switch to cycle through the
INPUT SELECT method
options. (page 22)
INPUT SELECT
Display the menu on screen.
Return to the previous menu in
menu mode. (page 26)
MENU
Heated air comes out of this
opening.
Air exhaust port
Remote control
signal receptor
Receive a signal from the
Remote control. (page 22)
NOTE:
Do not cover the ventilation openings or place anything within 10 cm (4") of them as this may cause damage
or injury.
While the projector is not in use, attach the Lens cover to protect the lens.
12 - E
NGLISH
Illuminates or flashes to
indicate the status of the lamp
unit. (page 36)
LAMP
Control panel
Illuminates or flashes to
indicate the temperature status
of the lamp unit. (page 36)
TEMP
Senses the luminance for the
LIGHT HARMONIZER feature.
(page 29)
LUMINANCE SENSOR
Navigate through the menu
with F G H I
,
and
ENTER
RETURN. (page 26)
Navigation buttons
Turn the outer ring to adjust
the focus of the image.
(page 21)
Focus ring
Turn the inner ring to adjust
the image size. (page 21)
Zoom ring
Intake fresh air to control the
temperature inside.
Air intake port
Adjust the position of the
projected image.
Shift lever
2.0 power zoom lens.
Projection lens
Protects the Projection lens
from dust or dirt.
Lens cover
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
