Table of Contents
Advertisement
16.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 38
¡ The display shows oFF.
Press
to change the setting.
▶
a The display shows on if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows on and the
signal strength of the Wi-Fi connec-
tion.
16.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 38
¡ The display shows on.
Press
to change the setting.
▶
a The display shows oFF if the Wi-Fi
is deactivated.
16.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 38
¡ The display shows rEs.
Press and hold
▶
3 seconds.
a The network settings are reset.
for at least
16.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Deactivating remote start
Press
.
▶
goes out.
a
16.8 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com.
Home Connect en
39
Advertisement
Table of Contents
