Making A Video Call; Answering A Video Call - Panasonic KX-THA12 Operating Instructions Manual

Home communication system cordless video camera handset
Hide thumbs Also See for KX-THA12:
Table of Contents

Advertisement

Making a video call

1
During a call, press {VIDEO} to start
the video call.
L Aim the camera lens toward yourself
by rotating the lens.
L Your handset displays a view of
yourself until the video call is
connected, then it displays the live
video of the other party.
L If you are using the receiver, the
handset automatically switches to
speakerphone.
L Either caller can begin a video call by
pressing {VIDEO}. If both parties
press {VIDEO} at the same time, the
video call connection may fail,
returning you to voice call.
2
To switch to a voice call, press {V-
OFF}.
L To end the call, press {OFF}.
Adjusting the speaker volume
Press {^} or {V} while talking.
Note:
L KX-THA17 only:
While viewing images on your TV using
the included A/V out cable, you cannot
adjust the volume using the handset.
Adjust the volume on your TV.

Answering a video call

1
If the other party initiates a video call
during a voice call, your handset
switches to a video call automatically.
2
To switch to a voice call, press {V-
OFF}.
L To end the call, press {OFF}.
For assistance, please visit http://www.panasonic.com/phonehelp
Useful settings during a video
call
HOLD button
You can put an outside call on hold during
a video call.
During a video call, press {HOLD}.
Note:
L If the hold option is set to "Hold only"
(page 33), the video call is put on hold
and the privacy image set for hold (page
34) is sent to the other party. You cannot
transfer the video call. To return to the
video call, press {RESUME}.
L If the hold option is set to
"Transfer(audio)", the video call is
canceled and the voice call is put on
hold. To return to the voice call, press
{LINE1} or {LINE2} that is flashing on
the handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
Selecting image zoom
You can zoom in on the other party's image
on your display.
1
During a video call, press {MENU}.
2
"Display mode" i {SELECT}
3
Press {>} to select the zoom mode.
Press {<} to return to the wide mode.
4
{SAVE}
Video Phone
u
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tha17

Table of Contents