Table of Contents
Advertisement
Preparation
Symbols used in these
operating instructions
Symbols used for operations
Symbol
Meaning
q, G,
The symbols to the left
represent the handset
i, s,
menu icons.
t, u,
v, H,
Example: q
Press the navigator key of
x
the handset up, down, left,
or right to select that menu
icon shown on the display.
Example:
Press the navigator key up
"Ringer
or down to select the words
in quotations shown on the
volume"
display.
Proceed to the next
i
operation.
Example:
The words in the brackets
show button names on the
{MENU}
handset and base unit.
Press the navigator key up
{^}, {V}
or down to scroll through
the displayed items.
Press the navigator key left
{<}, {>}
or right to select the
desired items.
18
For assistance, please visit http://www.panasonic.com/phonehelp
Registering the handset
Registering the handset
Register the handset to your base unit.
The handset will be assigned an extension
number by your base unit.
Important:
L Before registering this handset or any
other compatible Panasonic units to
your base unit, we recommend you
change your base unit's PIN so that
other Bluetooth devices in the area are
not accidentally registered at the same
time. For more information, see the
operating instructions included with your
base unit.
1
Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
L After {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
2
Handset:
Press {OK} (F3), then wait until the
handset beeps.
L If you have changed the base unit's
PIN, enter it and press {OK}, then
wait until the handset beeps.
Note:
L If for some reason the handset is not
registered to a base unit, use the
following procedure to register it to the
base unit.
{MENU} (F2) i x i {SELECT}
i "Registration" i {SELECT}
i "Registration" i {SELECT}
i Repeat step 1. i {OK}
If you have already canceled the unit's
registration at the previous base unit,
follow steps 1 and 2.
Advertisement
Table of Contents
