Wi-Fi/NFC
Connecting to a smartphone/tablet by using the NFC function
Using the NFC "Near Field Communication" function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
∫ Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer
to the owner's manual of your device.
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
1
Launch "Image App" on your smartphone/tablet.
2
While [
] is displayed on the connection
screen of the "Image App", touch the
smartphone/tablet to [
•
It may take time to complete the connection.
•
When the smartphone/tablet has connected, an
camera
image of this
smartphone/tablet.
•
If a connection attempt by touching fails, restart the
"Image App", and then display the screen in step
again.
•
If a connection is established during single picture
playback, the picture will be transferred to the
smartphone/tablet. (P68)
When connecting for the first time, the connection confirmation screen is
displayed
1
When the connection confirmation screen is displayed on this unit, select
[Yes].
2
Touch the smartphone/tablet to [
•
The connected smartphone/tablet is registered to this
66
VQT5A95 (ENG)
(On your smartphone/tablet)
•
•
•
] of this unit.
will be displayed on the
] of the camera again.
Check that your smartphone/tablet is a
compatible model.
Turn on the Wi-Fi function.
Install the "Image App" in advance. (P64)
1
camera
.