Table of Contents
Advertisement
60
EN
Random Assemble Editing
Using the RM-V711U remote control, you can use P.AE/Effects and make an original edited tape.
Source tape (Camcorder)
1
MAKE CONNECTIONS
Connect the Docking Station to your VCR and
make sure that the playback picture and sound
are available on the connected TV (
57).
• Connections should be made while the power
is off. Making connections with the power on
can lead to electrical shock or malfunctions.
2
START SOURCE PLAYBACK
First turn the Power Dial to "PLAY". Press PLAY
and then press R.A. EDIT ON/OFF on the
remote control. Make sure to point the remote
control at the camcorder's remote sensor.
• The Random Assemble Editing Menu appears
on the TV screen or the LCD monitor.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
• Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
• You can't use a Picture Wipe/Dissolve at the
beginning of Program 1.
Downloaded from:
To VIDEO output jack
S-VIDEO cable (provided)
To S-VIDEO output jack
Remote sensor
https://www.usersmanualguide.com/
To AUDIO input jacks (L/R)
VIDEO/AUDIO
cable (provided)
To AUDIO output
jacks (L/R)
Red
White
Yellow
Core filter
To EDIT jack
New tape (VCR)
NOTES:
● When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR's remote pause terminal using an
pg. 56,
editing cable.
● If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the
Docking Station's editing jack to the remote control's
remote pause terminal using an editing cable.
● Set the VIDEO OUT select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video cable.
● Before Random Assemble Editing, make sure the
indications don't appear on the TV monitor. If they
appear during Random Assemble Editing, they will be
recorded onto the new tape. To clear the Playback
Sound Mode Display, press DISPLAY on the RM-
V711U Remote Control. Select "DISPLAY" and "TIME
CODE" from the Playback Menu (
or hide the Date/Time and the Time Code on the
recording. To show or hide all indications except for
the Random Assemble Editing Menu, press the
IND.ON/OFF button on the camcorder for longer
than 1 second. When Random Assemble Editing starts,
its indications disappear and are not recorded on the
new tape.
EDITING
Cable adapter (provided)
If your VCR has the 21-pin
Red
AV input connector
(SCART), use the provided
White
cable adapter.
Yellow
To VIDEO
input jack
To S-VIDEO
input jack
VIDEO OUT
(Recording deck)
select switch
(Y/C or CVBS)
To remote pause jack
Editing cable
(provided)
PLAY
R.A. EDIT
ON/OFF
(Cont.)
VCR
RM-V711U
T
W
pg. 52) to show
Advertisement
Table of Contents
