Balance; Surround; Spdif Type; Default Audio Language - TCL LE39FHDF3300 User Manual

Frequency Range: displays the different graphic
equalizer names set for each sound preset option.
automatically changes to Personal
to select the desired frequency (100Hz, 300Hz,
1KHz, 3KHz, 10KHz) you wish to adjust. Use
adjusting the levels, press MENU to exit.
Balance: adjust the amount of audio sent to the left
Surround: option On/Off. When turned on, this
option enables a mode which simulates a surround
sound effect.
Speaker: option On/Off. When you select the Off
off.
SPDIF Type: this option controls the type of audio
Available options are Dolby Digital, PCM, or Off.
Auto Volume Control: option On/Off. This option
reduces the annoying blasts in volume that often
softer sounds in program material, eliminating the
need for constant volume adjustment.
Analog TV Sound: this option controls the manner
Options available vary according to the input
selected.
Note: The Analog TV Sound option is only available
for analog channels.
Mono (available for regular TV viewing only):
this option plays the sound in mono only. Use
stereo signals.
Stereo : this option splits the incoming stereo
programs and recorded materials have stereo
audio. The word "Stereo" appears in the Channel
Banner when you tune to a program that is
broadcast in stereo.
Second Audio Program (SAP): this option plays
the program's audio in a second language, if
available. The letters "SAP" appear in the Channel
anner when you tune to a program that is broadcast
with SAP information. SAP audio is broadcast in
mono only. SAP is also used to broadcast a
program's audio with descriptions of the video for
the visually impaired.
Default Audio Language: choose the language you
prefer for dialog on digital channels. If the preferred
Equalizer option
language is not broadcasted with the program,
(usually English in the US). There are 3 available
default languages (English, French, Spanish).
Note: The Default Audio Language option is only
available for ditital channels.

Current Audio Language

from the list of languages available for the program
you're watching. The language chosen becomes
your preferred language for all digital channels until
default language for the program (usually English in
the US).
Note: The Current Audio Language option is only
available for ditital channels.

Setup Menu

The Setup
with your preferences. Press MENU on the remote
then press OK
(Refer to Figure 3.)
Signal Type: choose the type of signal (Cable/Sat
or Antenna) you have connected to the ANT/
CABLE/SAT IN.

Channel Scan

searches for channels with signals and stores the
channel information in the Channel List. Then, as
to the next or previous channel in the Channel List
will need to rescan for channels.
To automatically scan for channels:
highlight Channel Scan.
2. Press OK
search progress and how many channels are
found in the on-screen menu. (Note: If you wish
to stop the search, press the CLEAR button.)
3. After the scan is complete, press OK to restart
scan, or press the MENU button to return to the
previous menu, or press the CLEAR button to
close the menu.
Channel Skip
You can hide channels in the Channel List. Then,
when you press the CH+ or CH-
14
Menu Operation
CH+ or CH-
Setup