Pioneer VSX-935 Instruction Manual page 58

Connecting a TV or Integrated Amplifier in a separate room (Multi-zone)
Connecting a TV (ZONE 2)
a
TV
a HDMI cable
Be sure to insert the HDMI
cable all the way in.
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). Note that only the devices connected to the HDMI IN1 to IN3
jacks can be played on the TV in the separate room.
• The audio from externally connected AV components can be output only
when the signal is 2 ch PCM audio. It may also be necessary to convert the
audio output of the AV component to PCM output.
Setup
• When video and audio via HDMI input are output to ZONE 2, set "Input/
Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p111) to "Use" on
the System Setup menu. Note that when "Zone 2 HDMI" is set to "Use", the
resolution of the video that can be output by the HDMI OUT SUB/ZONE 2
jack will be limited to "4K Standard" ( →p111).
Connections
58