en operation
Fold the measuring aid down and
3.
click it into place.
Push in the detergent drawer.
4.
13.8 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 28.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 17
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.9 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 28
Press Start / Reload.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
30
13.10 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The programme end time is set
and activated.
→ "Buttons", Page 22
Press Start / Reload.
1.
The activated programme end time
is paused.
Press Finish In until the display
2.
shows the required programme
end time.
Press Start / Reload.
3.
The changed programme end time
is activated.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press Start / Reload.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
→ "Opening the door", Page 28
Add or remove laundry.
3.
Close the door.
4.
Press Start / Reload.
5.
13.12 Cancelling the pro-
gramme
Press Start / Reload.
1.
Open the door.
2.