Table of Contents
Advertisement
Mobile inStAllAtion
To install the transceiver, select a safe, convenient location inside your
vehicle that minimizes danger to your passengers and yourself while the
vehicle is in motion. Consider installing the unit at an appropriate position
so that knees or legs will not strike it during sudden braking of your
vehicle. Try to pick a well ventilated location that is shielded from direct
sunlight.
11
Install the mounting bracket in the vehicle using the supplied self-
tapping screws (4pcs) and flat washers (4pcs).
21
Position the transceiver, then insert and tighten the supplied hexagon
SEMS screws.
Double check that all screws are tightened to prevent
vehiclevibration from loosening the bracket or transceiver.
Car body
Washer (M5)
Tapping screw
(M5X20mm)
Mounting bracket
Initial Installation
Determine the appropriate angle of the transceiver, using the 3
screw hole positions on the side of the mounting bracket.
3
3
Advertisement
Table of Contents
