Table of Contents
Advertisement
Step 7: Remote Feature Programming
When the Carbine security system control module learns the transmitter operating code, a specific group
of operating features are automatically programmed to a default setting. These default settings can be
changed by following the enclosed procedure and using the consumer transmitter for programming.
#
Programmable Alarm Feature
1
Chirp Status Indicator
2
Last Door Closed Automatic Arming
3
Ignition Key Controlled Door Lock/ Unlock
#3 Button (Channel 3 or Panic Operation)
4A
(3-Button Regular Transmitter Only)
Panic Button (Panic or Channel 3 Operation)
4B
(4-Button Code Hopping Transmitter Only)
Insert the Valet Switch
and Make Sure the
Valet/Override Switch is
in the "Off" Position
Turn On the Ignition
The LED will remain off.
14
S t e p 1
Note shape of housing.
"Off"
Positon
S t e p 3
ON
Default Setting
On
Automatic Arming of Alarm "Off"
Off
Channel #3
Panic
"On"
Positon
Disarm the Security
The LED will be off and the horn/siren
will emit 2 chirps
S t e p 4
Push the Valet Switch 12 Times
(Represent 6 Times On/Off)
The LED will be on solid and the horn/siren will emit
1 long then 1 short chirp. You are now in the
"Remote Feature Programming" mode.
S t e p 2
R
System
12x
Advertisement
Table of Contents
