One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TG2563 Operating Instructions Manual

One-Touch Dialer

You can store a phone number in the
stored number is dialed with a one-touch operation.

Storing a Phone Number in the DIRECT Button

Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/EXIT/CH)
2 Press
Ö
points to "Program".
Press
3
FWD/EDIT á
4 While the arrow points to "Save
DIRECT#", press
5 Enter a phone number, up to 22 digits.
•Each time you press (INTERCOM/CLEAR) the
digit to the left of the cursor is erased. To erase
all digits, press and hold (INTERCOM/CLEAR).
•To move the cursor, press BACK Ü or
FWD/EDIT á.
6 Press
Ö
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
Press
7
FWD/EDIT á
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 52).
34
or repeatedly until the arrow
Ñ
(Yes key).
FWD/EDIT á
(Next key).
(Save key).
(DIRECT)
.
(Yes key).
button of the handset. The
H
Program
GF
H
Save DIRECT#
Set flash time
GF
IH
1234567890123456
789012
IH
1234567890123456
789012
F
=Edit
1234567890123456
789012
Save DIRECT#
H
=Yes
H
=Yes
G
=Next
G
=Next
H
=Save