Listening To Voice Mail Messages; Message Alert - Panasonic KX-TG2480S Operating Instructions Manual

Voice Mail Service
Turning VM detection on/off
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press
{Select}.
3
Scroll to "Voice Mail" by pressing {V}
or {^}, then press {Select}.
4
Scroll to "VM tone detect" by
pressing {V} or {^}, then press
{Select}.
5
Select the line by pressing {V} or {^}.
6
Press {V} or {^} repeatedly to select
"On" or "Off".
7
Press {Save}, then press {OFF}.
Listening to Voice Mail
messages
The unit will let you know that you have
new Voice Mail messages in the following
ways:
– The V.M. indicator will flash on the base
unit.
– "Voice Mail" will be displayed on the
handset.
– The message indicator on the handset
will flash slowly if message alert feature
is turned on.
1
Press {C}, {s}, {Line1}, or {Line2},
then press {VM} within 15 seconds.
L If {VM} is not displayed, the Voice
Mail access number has not been
stored. Store the number (page 33).
OR
Press {MENU}, then press {Select} at
"V.M. access". Select the line by
pressing {V} or {^}.
L The speakerphone will turn on.
2
Follow the pre-recorded instructions.
3
Press {OFF} when finished.
34
For assistance, please visit http://www.panasonic.com/consumersupport
Note:
L If "Voice Mail" still remains on the
display even after you have listened to
new messages, turn it off by pressing
and holding {OFF} until the handset
beeps.
L If your Voice Mail service uses Voice
Mail tones and the message is over 3
minutes long, the handset may not
indicate new messages.
L If your Voice Mail service uses Voice
Mail tones, the tones will be heard from
any phone connected to the same line. If
you want to use another phone to listen
to Voice Mail messages, you have to dial
your access number manually.

Message alert

You can select whether or not the
message indicator on the handset will
flash when new messages have been
recorded. The default setting is OFF.
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press
{Select}.
3
Scroll to "Message alert" by pressing
{V} or {^}, then press {Select}.
4
Press {V} or {^} repeatedly to select
"On" or "Off".
5
Press {Save}, then press {OFF}.
Note:
L The message indicator will not flash for
new messages while the handset is in
use.
L While message alert is on, battery
operating time will be shortened (page
15).