Subscribe to Our Youtube Channel
Related Manuals for Knightsbridge LED3 Series
Summary of Contents for Knightsbridge LED3 Series
- Page 1 INSTALLATION & MAINTENANCE MANUAL LED3xxx / LED5xxx / LED11xxx LEDT3xxx / LEDT5xxx / LEDT11xxx...
- Page 2 GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: LED3xxx / LED5xxx / LED11xxx / LEDT3xxx / LEDT5xxx / LEDT11xxx SAFETY •...
- Page 3 Using the clip as a template, mark the location for, and drill the fixing holes ensuring not to infringe wit • any gas / water pipes or electrical cables and insert the luminaire into the clips until it locks into place. any gas / water pipes or electrical cables and insert the luminaire into the clips until it locks into place.
- Page 4 Connect the touch dimmer to the luminaire • • Connect the secondary side of the driver to the touch dimmer (see Fig. 3) Fig. 3 Fig. 3 Fig. 3 LEDDIMMER – suitable for both the flat and triangular ranges of luminaires and enables all further units to be LEDDIMMER –...
- Page 5 WARNING This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL GENERAL This product contains a light source of energy efficiency class C (LED3WCW, LE LED11WWW, LED3WWW, LED5WCW, LED5WWW, LEDT11WCW, LEDT11W This product contains a light source of energy efficiency class C (LED3WCW, LEDT3WCW) / D (LED11WCW, LEDT5WCW, LEDT5WWW) to Regulation (EU) No.
- Page 6 WARRANTY This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement.
Need help?
Do you have a question about the LED3 Series and is the answer not in the manual?
Questions and answers