Table of Contents
Advertisement
2.
Image
You can adjust brightness, contrast,
sharpness, saturation,position (VGA
only), ASCR, and focus (VGA only) from
this main function.
•
Brightness: the adjusting range is from 0 to 100.
activate this function.
•
Contrast: the adjusting range is from 0 to 100.
•
Sharpness: the adjusting range is from 0 to 100.
•
Saturation: the adjusting range is from 0 to 100.
Position: adjusts the horizontal postition (H-Position) and the vertical
•
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
•
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
•
3.
Color
Select the desired
image color from this function.
•
Color Temp.: contains five color modes including Cool, Normal,
Warm, sRGB, and User mode.
•
Skin Tone: contains three color modes including Reddish, Natural,
and Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-
configurable; the adjusting range is from 0-100.
3-16
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
is a hotkey to
Chapter 3: General Instruction
Advertisement
Table of Contents
