Related Manuals for Pendulum FDA-301A
Summary of Contents for Pendulum FDA-301A
- Page 1 Frequency Distribution Amplifier FDA-301A U S E R M A N U A L Part No.: 4031.604.66041 Revision: Date: 29.03.2023 © 2023 Pendulum Instruments. All rights reserved.
-
Page 2: General Information
The warranty commitments are rendered void if unauthorized and pulsed signals. It gives significantly increased performance access to the interior of the instrument has taken place during compared to traditional Distributors of signals. The FDA-301A the given warranty period. offers the following advantages: Multiple signal types: •... -
Page 3: Environmental Considerations
Z=4: 6x pulse fiber Z=5: 4x ToD electrical impact of the product. Product End-of-Life Handling Example: NC = 9446 130 11021 = FDA-301A with 10 MHz input only (X), no DC option (Y) plus one empty output slot, one Observe the following guidelines when recycling an instrument 6x 10 MHz fiber output, and one 4x 10 MHz coax output (ZZZ). - Page 4 Rackmount Adapter – two instruments (Option 22/05) This rackmount adapter can hold any two standard Pendulum ½ * 19” unit, like FDA-301A, CNT-9x, GSG-5, GSG-6, GPS-12x etc. Rackmount Adapter – one instrument (Option 22/90) This rackmount adapter can hold any standard Pendulum ½ * 19”...
- Page 5 • 2 Ear, rack 1 Assembly instruction, SXS Rack kit • • 2 Screws M4x8 8 Screws M5x10 • • 1 Spacer M4x16 Assembling the Rackmount Kit (Option 22/05) • Turn the devices upside down Remove the rubber feet in the plastic stand • Loosen the screws underneath the rubber feet •...
-
Page 6: Using The Controls
There are no settings controls whatsoever on Sine the FDA-301A, not even a power switch. The operation is truly plug-and-play. Just plug in the FDA-301A to the mains power, The Sine input channel is intended for narrowband reference and connect your input source –... -
Page 7: Configuration Examples
24 users receives 1x 10 MHz sine and 1x 1-pps pulse 2 fiber (1x sine + 1x pulse) output slots used in 1 transmitter FDA-301A 2 coax (1x sine + 1x pulse) output slots used in 6 Each user receives 1x 10 MHz... -
Page 8: Quick Performance
This occurs for example when the transmitting and receiving amplifiers are connected to different electrical • Connect the power plug to the rear panel of FDA-301A (No switchboards. Ground current loops may add additional noise to input signals connected) the transmitted signal. - Page 9 • Connect the signal from the Sine Fiber output module of level 5V, Low-level 0V pulse signal on generator the FDA-301A transmitter to the input of the optical power Verify using CNT-90 that the output frequency signal is 1Hz, •...
-
Page 10: Preventive Maintenance
FDA-301A unit Connect the signal from the Sine Fiber output module of the • The FDA-301A contains a fan with an expected life time of 5 FDA-301A transmitter to the sine fiber input of the FDA- years with continuous 24h/day operation. -
Page 11: Technical Specifications
Fiber type: Multimode fiber, 62.5/125μm or 50/125μm USA: Coax Output Sine Connectors: BNC female Impedance: 50 Ohm nominal Pendulum Instruments 50 Woodside Plaza # 642 Redwood City, Output voltage: 1Vrms (sine) ±10% in 50 ohm CA 94061 Visiting address: as above Delivery address: as above... - Page 12 +46 280 41122 info@pendulum-instruments.com UNITED STATES phone +1(866) 644-1230 us-office@pendulum-instruments.com POLAND phone. +48 (58) 681 8901 info@pendulum-instruments.com © Pendulum Instruments 2023 29.03.2023. FDA-301A. User Manual CHINA phone. +86 13501221550 Specifications subject to change сhina-office@pendulum-instruments.com or improvements without notice. www.pendulum-instruments.com...