Panasonic KX-TG2208 Operating Instructions Manual page 6

4
Things You Should Know
4-E Wall Mounting
This unit can be mounted on a wall phone plate.
1
Press the tabs in the
direction of the arrows
(1), then remove the
wall mounting adaptor
(2).
2 Connect the AC adaptor.
≥Fasten the AC adaptor
cord to prevent it from
being disconnected.
3 Tuck the telephone line
cord inside the wall
mounting adaptor, then
push the adaptor in the
direction of the arrows
(1 and 2).
≥The word "UP WALL"
should face upward.
4 Connect the telephone
line cord. Mount the unit,
then slide down.
≥Raise the antenna.
5 To charge the handset battery:
Place the handset on the base unit.
≥The CHARGE indicator lights and
the unit beeps once.
1
1
2
Hook
To Power
Outlet
2
1
For assistance, please call: 1-800-211-PANA(7262)
4-F Base Unit Location/Noise
Calls are transmitted between the base unit and the handset using
wireless radio waves. For maximum distance and noise-free
operation, the recommended base unit location is:
Away from electrical appliances
such as a TV, personal computer
or another cordless phone.
Raise the
antenna.
Note:
≥If you use the handset near a microwave oven which is being
used, noise may be heard from the receiver or the speaker. Move
away from the microwave oven and closer to the base unit.
≥If you use the handset near another cordless phone, noise may be
heard. Move away from the other cordless phone and closer to
your base unit.
4-G Specifications
∫Base unit
Power Supply:
Power Consumption:
Frequency:
Dimensions (H k k W k k D): Approx. 104 mm k 148 mm k 173 mm
Mass (Weight):
∫Handset
Power Supply:
Frequency:
Dimensions (H k k W k k D): Approx. 246 mm k 52 mm k 41 mm
Mass (Weight):
Security Codes:
∫Dialing Mode:
∫Operating Environment: 5°C–40°C
Specifications are subject to change without notice.
Energy Star:
E S
R
≥As an NERGY TAR Partner, Panasonic has
determined that this product meets the
S
TAR guidelines for energy efficiency.
S
TAR is a U.S. registered mark.
In a HIGH and CENTRAL
location with no obstructions
such as walls.
AC Adaptor (120 V AC, 60 Hz)
Standby: Approx. 2.6 W
Maximum: Approx. 3.9 W
2.402 GHz–2.480 GHz
(4 3 ⁄ q k 5 27 ⁄ q k 6
32 32
Approx. 310 g (0.68 lb.)
Ni-MH battery (2.4 V, 1,500 mAh)
2.402 GHz–2.480 GHz
11 1
(9 ⁄ q k 2 ⁄ q k 1
16 16
Approx. 210 g (0.46 lb.)
1,000,000
Tone (DTMF)/Pulse
E
NERGY
E
NERGY
"
13 ⁄
q)
16
5
⁄
q)
8