Garmin FUSION APOLLO RV-RA770 Installation Instructions Manual page 17

Hide thumbs Also See for FUSION APOLLO RV-RA770:

Table of Contents

Fusion PartyBus stereo

Wired network switch or wired network router

Fusion PartyBus zone stereo or remote control

Wireless Networking Considerations

When you are planning your network, observe the following considerations for all wireless connections.

• Wired connections are more reliable than wireless connections. You should plan your network to use network

cables, but if it is not possible, many Fusion PartyBus devices are Wi‑Fi

wireless routers or access points.

• If you install a wireless router on the network, it should be configured to be the DHCP server by default. See

your wireless router instructions for more information.

• If you are not using a wireless router, you can configure this device as a wireless access point, so you can

connect other devices within wireless range.

NOTE: You should not configure this device as a wireless access point if you have a router installed on the

network, because it may introduce DHCP conflicts and result in poor network performance.

• If you connect a Fusion PartyBus device to the network as a WI-FI CLIENT, you cannot connect any additional

wired Fusion PartyBus devices to that device.

• You can connect a smartphone to the wireless network to control any stereo on the network using the

Fusion-Link

app.

™

• You can connect an Apple

network using Apple AirPlay

• Connecting a Bluetooth

• Wi‑Fi signals may interfere with Bluetooth device connections. You should turn off the Wi‑Fi setting on your

stereo if you are not using it to connect to a wireless network or to provide a wireless access point.

device to the wireless network to stream media to multiple stereos on the

device to the stereo may interfere with some Wi‑Fi connections.

compatible. You can connect them to

Table of Contents