Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo ThinkVision T24m-29 User Manual

Setting up your monitor

This section provides information to help you set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety Information located in the Flyer before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect one end of the DP cable to the DP connector on the back of the computer, and the other
3. Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and the other
1-4 T24m-29 Flat Panel Monitor User's Guide
end to the DP connector on the monitor. Lenovo recommends that customers who require using the
Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable
0A36537".
For more information, go to the following:
www.lenovo.com/support/monitor accessories
end to the HDMI connector on the monitor. Lenovo recommends that customers who require to use the
HDMI input on their monitor purchase the "Lenovo HDMI to HDMI cableOB47070".
For more information, go to the following:
www.lenovo.com/support/monitor accessories