Fisher-Price GCR67 Quick Start Manual

Press top for tunes
• For best performance and longer battery life, we
recommend replacing the batteries that came with
this toy with three, new AA (LR6) alkaline batteries.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door. Remove exhausted batteries and
dispose properly.
• Insert three, new AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• When sounds or lights from this toy become
faint or stop, it's time for an adult to change
the batteries.
• If this toy begins to operate erratically, you
may need to reset the electronics. Remove the
batteries and reinstall.
• Wipe the toy with a clean, damp cloth.
Do not immerse.
fisher-price.com
Keep these instructions for
future reference as they
contain important information.
Battery installation is required.
Only adults should install batteries.
Required tool: Phillips
screwdriver (not included).
1,5V x 3
AA (LR6)
Requires three AA batteries
(included). Batteries included are
for demonstration purposes only.
For longer life, use alkaline batteries.
Slide rings on base
for sounds and lights for sounds and lights
GCR67