Gigabyte Z790I AORUS ULTRA User Manual page 8

USB
Internal
Connectors
Back Panel
Connectors
(Note 1) The connector is on the front of GC-Z790I BTB PLUG.
(Note 2) The connector is on the back of GC-Z790I BTB PLUG.
Chipset:
Š
- 1 x USB Type-C
- 1 x USB Type-C
internal USB header
- 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports on the back panel
Chipset+USB 2.0 Hub:
Š
- 4 x USB 2.0/1.1 ports available through the USB headers on the front of
GC-Z790I BTB PLUG
1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Š
1 x external power connector
Š
1 x CPU fan header
Š
1 x fan/water cooling pump header
Š
2 x system fan headers (SYS_FAN1/SYS_FAN2
Š
1 x addressable LED strip header
Š
1 x RGB LED strip header
Š
2 x M.2 Socket 3 connectors (M2A_CPU
Š
2 x SATA 6Gb/s connectors
Š
1 x front panel header
Š
1 x front panel audio header (routed from the adapter card on the rear panel)
Š
1 x speaker header
Š
1 x USB Type-C
®
Š
1 x USB 3.2 Gen 1 header
Š
1 x USB 2.0/1.1 header
Š
1 x reset button
(Note 1)
Š
1 x reset jumper
Š
1 x Clear CMOS jumper
Š
2 x SMA antenna connectors (2T2R)
Š
1 x DisplayPort
Š
1 x HDMI port
Š
1 x USB Type-C
®
Š
3 x USB 3.2 Gen 2 Type-A ports (red)
Š
2 x USB 3.2 Gen 1 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x Q-Flash Plus button
Š
1 x RJ-45 port
Š
2 x audio jacks
Š
port on the back panel, with USB 3.2 Gen 2x2 support
®
port with USB 3.2 Gen 2 support, available through the
®
(Note 1)
(Note 1)
header, with USB 3.2 Gen 2 support
(Note 1)
port, with USB 3.2 Gen 2x2 support
- 8 -
)
(Note 1)
/M2P_SB )
(Note 2) (Note 1)