LG LAT140GT82S Owner's Manual page 14

14
Warning
• The warranty will not cover any component damage caused by electrostatic discharge at the time of installation.
When installing this product, you must wear anti-electrostatic discharge (ESD) gear.
• There should be no oil, water, dust and foreign substance on the glass surface where the colored, transparent LED
film will be installed.
• Do not use surfactant-containing products for cleaning. It compromises the film's adhesive strength.
• It is recommended that you use dedicated tools (for film attachment) when installing the film.
• Workers should wear masks and antistatic gloves and be careful not to allow foreign objects to adhere to the product
or the glass surface.
• The colored, transparent LED film should not be folded or wrinkled, and once attached, should not be separated from
the glass.
• Be cautious when handling the colored, transparent LED film because it is vulnerable to static electricity and foreign
substances.
• After opening the product, install it immediately or within 1 month at the latest.
• Applying strong physical impact on the installed film surface may damage the product.
Required Items for Installation
Oil-based marker, mask, antistatic gloves, the Phillips-head screwdriver, wool putty knife, (steel) ruler
Installation Preparation
• Leave 1-2 mm (0.03-0.07 inches) of the gap between the aluminium bars when attaching them to the glass surface.
- A pressure of 5 to 7 kgf (11.0 to 15.4 lbf) is needed when attaching to the glass surface.