Programmable Functions
You can program the following function items using the handset near
the base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the handset is in the standby mode.
(FUNCTION/EXIT/CH)
Press
<Function menu>*
1Save directory
Voicemail dial
Ringer volume
Program
<Function menu>*
1Save DIRECT#
Set flash time
Save mailbox#
Voicemail tone
Set line mode
Set dial mode
Talk switching
During programming
*To select a desired function item, press
arrow points to the item. Then press
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
16
.
To store an item in the directory (p. 33).
To dial the access number for voice mail
service (p. 42).
To select the ringer volume (p. 18).
FWD/EDIT (fl)
Press
To store a phone number in the DIRECT button
(p. 30).
To select the flash time (p. 45).
To store a voice mail access number (p. 40).
To set the voice mail tone (p. 41).
To select the line mode (p. 15).
To select the dial mode (p. 14).
To set the auto talk feature (p. 17).
(›)
FWD/EDIT (fl)
.
(‹)
or
repeatedly until the
to go to the next step.