Re-Connecting With The Paired Device; Headset Controls - iBLUON BT-HS02 User Manual

6. Re-connecting with a paired device
Although you disconnect your headset from the paired device, you don't need to
re-pair with the same device that was already paired before in order to
reconnect your headset to that device. You can only turn the power-switch on
and wait for a couple of seconds to reconnect your headset to that device.
7. Headset Control
Action
Power On
Pairing Mode - Enter
Pairing Mode - Exit
Wake Up the Headset
Reconnect
Battery Check
Play/Pause
Play stop
Backward Search
Forward Search
Volume Up
Volume-up (Repeat)
Volume-down
Volume-down (Repeat)
Accept Call
Mic Mute On/Off
Voice Dial
Call Transfer
Reject Call
Hang Up Call
Last Call
Cancel Call
* Short key : 0.5~2 seconds, Long key : 2~5 seconds,
Very long key : Over 5 seconds
Key Definition
Key Press Time
Slide S/W On Don't care
Very Long
Short or Long
+/- & << >>
<<
>>
+
Continuous
_
Continuous
<< or >>
Start-Up Sound
Warning Sound
Short Tick Sound
Long Tick Sound
Tick Sound
Pressed No Sound
Short No Sound
Long Tick Sound
Short Tick Sound
Short Tick Sound
Short Tick Sound on
Volume Limit
Short Tick Sound on
Volume Limit
Short Tick Sound
Short Tick Sound
Short Tick Sound
Long Tick Sound
Long Tick Sound
Short Tick Sound
Long Tick Sound
Short Tick Sound
Sound
Effect