12. Warranty 13. Need more help? 1. Introduction Thank you for choosing the BT-HS02 Bluetooth Stereo Headset with Bluetooth technology. BT-HS02 Bluetooth Stereo Headset makes connectivity invisible and reliable, besides will provide you with wireless control over many of today’s...
3. Feature 4. Charging BT-HS02 Stereo Headset uses the rechargeable Lithium-Polymer battery. Make sure your BT-HS02 is fully charged for two hours before you start using.
How to charge; 1) Plug the USB cable into the USB port on your computer. 2) The LED indicator is red when charging the headset. 3) The LED indicator turns blue when the battery is fully charged. 4) Remove the battery charger from the headset. 5.
6. Re-connecting with a paired device Although you disconnect your headset from the paired device, you don’t need to re-pair with the same device that was already paired before in order to reconnect your headset to that device. You can only turn the power-switch on and wait for a couple of seconds to reconnect your headset to that device.
8. What the lights mean LED-Blue LED-Red Action Note Status Time Time Status Time Time (sec) (sec) (sec) (sec) Pairing Blink Blink Mode 1 Mode 1 A2DP Blink 0.05 Streaming Mode 1 Waiting Blink 0.05 0.05 Connection Mode 2 Ring Blink 0.05 0.05...
9. Products Specification Version 2.0, Class II Bluetooth Version A2DP, AVRCP, HSP, HFP Bluetooth Support Profile 2,4GHz / 79 Channel / AFH RF Frequency Coverage Range* Bluetooth standard 33 feet (10 meters) Music Playback Time* Up to 8 hours (The maximum playback time depends on the usage frequency and environmental factors.
within 100 meters (33 feet) of each other, with no major object in the way. If you have no light on the indicator LED, - Please make sure if the headset is switched on or you also check the battery if it is too low for power on. If you have pairing problems, - You may have deleted the pairing connection in you Bluetooth mobile phone, MP3, and other Audio devices.
Page 10
Additional page FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, Including interference that may cause undesired operation Information to User This equipment has been tested and found to comply with the limits for a Class...