Phone Book; Storing Names And Numbers - Panasonic KX-TC1486 Operating Instructions Manual

Phone Book

You can store up to 10 names and phone numbers in the phone book.
Using the phone book, you can make a call by selecting a name on the
handset display.

Storing Names and Numbers

Make sure the unit is in the standby mode.
1 Press [AUTO/PROGRAM].
2
Press a memory station number ([0] to [9]).
≥If an item is already stored, that information is
displayed.
3 Press [EDIT].
4 Enter a name, up to 15 characters, using
the dialing buttons ([1] to [9]),
≥See the steps for entering names and symbols
(p. 21).
≥If a name is not required, press [EDIT] and go
to step 6.
5
Press [EDIT].
6 Enter a phone number, up to 24 digits.
≥Each time you press [MUTE/CLEAR], the digit
is erased from the right. To erase all of the
digits, press and hold [MUTE/CLEAR].
≥To show the cursor, press
digit. Each time you press [MUTE/CLEAR],
the digit under the cursor is erased.
≥When you store the last number dialed, press
[PAUSE/REDIAL] instead of entering a phone
number.
7
Press [EDIT] to save.
≥A beep sounds.
≥The handset will return to the standby mode.
≥If a pause is required for dialing, [PAUSE/REDIAL] can be stored in a phone
number counting as one digit (p. 26) in step 6.
≥You can exit the programming mode at any time by pressing [OFF].
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
20
[ ]
[ ]
or .
[ ]
after entering a
SELECT STATION#
EMPTY
ENTER NAME :
ENTER NUMBER :
TOM
TOM
TOM