Connect To The Internet - TCL P635 Series Manual

Connect to the Internet

Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network.
The connection method may be different depending on your actual network configuration. If you have any
questions about your home network, please refer to your Internet service provider.
Wired connection
Wireless connection
Network settings:
1. Press
on the remote control to display the dashboard menu.
2. Select Settings and press OK to enter the settings menu.
3. Press ▲/▼ to select Network and Internet, press OK to enter the submenu and follow the on-screen
guidance to set up your network.
Notes:
- Your TV might not have all connectors visible on diagram above. Number of USB and HDMI ports may vary
according to TV model.
- Button and connector locations may vary according to TV model.
- USB connectors are for data input from USB drives and for connecting other relevant USB devices where
applicable.
- All USB devices have to be directly connected to TV set without cable extenders. In case extender is
required, maximum 50cm length is recommended. Longer extenders should have ferrite beads.
- eARC/ARC (enhanced Audio Return Channel / Audio Return Channel) function is only supported on the
HDMI port identified with eARC/ARC. To use ARC function, please turn on CEC function first as described in
the CEC section.
- It is recommended to use high quality and well shielded HDMI cables to avoid possible interferences.
- Please use headphones with 3.5mm TRS connector. Excessive sound pressure from headphones can cause
hearing loss.
Router
LAN port
Wireless router
EN 6
Modem Internet
Modem Internet
Connections