Making Calls
To have a hands-free conversation, connect an optional headset to the
handset (p. 27).
(–––/FLASH)
1
Press
≥After a few seconds, the display will show the
receiver volume.
2
Dial a telephone number.
≥The dialed number is displayed.
3
To hang up, press
handset on the base unit.
≥If an alarm tone sounds in step 1, move closer to the base unit or place the
handset on the base unit, and try again.
≥If additional dialing is necessary after using speed dialing functions such as
phone book dialing (p. 22) or REDIAL, wait until speed dialing is finished to
continue further dialing. Otherwise, the unit may not dial properly.
To dial after confirming the entered number (Predial)
1
Dial a phone number.
≥If you misdial, press (MUTE/CLEAR).
One digit is erased from the right. Dial the
correct phone number.
(–––/FLASH)
2
Press
≥After a few seconds, the display will show the
receiver volume and phone number.
3
To hang up, press
handset on the base unit.
To redial the last number dialed
(–––/FLASH)
Press
To redial after confirming the last number dialed
(PAUSE/REDIAL)
Press
If noise interferes with the conversation
(CH/FUNCTION)
Press
move closer to the base unit.
For assistance, please call: 1-800-211-PANA(7262)
.
(OFF)
or place the
.
(OFF)
or place the
¤
(PAUSE/REDIAL)
¤
(–––/FLASH)
to select a clearer channel in the talk mode or
CONNECTING
TALK
CONNECTING
TALK
.
.
"
VOL
VOL
11