Hints And Tips - Zanussi 949738769 User Manual

When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
5.11 Power management
If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
• If the hob reaches the limit of maximum
available power (refer to the rating plate),

6. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones a
strong electro-magnetic field
creates the heat in the cookware
very quickly.
Use the induction cooking zones with
suitable cookware.
• The bottom of the cookware must be as
thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not slide or
rub the pot across the ceramic glass.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is suitable for an induction hob
if:
• water boils very quickly on a zone set to
the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
you can hear
• The heat setting of the cooking zone
• The heat setting display of the reduced
• Wait until the display stops flashing or
Cookware dimensions
• Induction cooking zones adapt to the
• The cooking zone efficiency is related to
• For both safety reasons and optimal
6.2 The noises during operation
If you can hear:
• crack noise: cookware is made of different
• whistle sound: you use a cooking zone
• humming: you use a high power level.
the power of the cooking zones will be
automatically reduced.
selected last is always prioritised. The
remaining power will be divided between
the previously activated cooking zones in
reverse order of selection.
zones changes between the initially
selected heat setting and the reduced
heat setting.
reduce the heat setting of the cooking
zone selected last. The cooking zones will
continue operating with the reduced heat
setting. Change the heat settings of the
cooking zones manually, if necessary.
dimension of the bottom of the cookware
automatically.
the diameter of the cookware. The
cookware with a diameter smaller than the
minimum receives only a part of the
power generated by the cooking zone.
cooking results, do not use cookware
larger than indicated in "Cooking zones
specification". Avoid keeping cookware
close to the control panel during the
cooking session. This might impact the
functioning of the control panel or
accidentally activate hob functions.
Refer to "Technical data".
materials (a sandwich construction).
with a high power level and the cookware
is made of different materials (a sandwich
construction).
ENGLISH 13