How To Charge And Start The Watch - Seiko Prospex SSC813P Instruction Manual

Standard measurement
A A
START STOP RESET
Accumulated elapsed time measurement
A A
START STOP RESTART
Restart and stop of the stopwatch can be repeated by pressing Button A.
Split time measurement
A B
START SPLIT
RELEASE
Measurement and release of split time can be repeated by pressing Button B.
Measurement of two competitors
A B
START FINISH TIME
OF
1ST COMPETITOR
20
B
A
A B
STOP RESET
B A B
SPLIT STOP RESET
A B
2ND FINISH TIME
COMPETITOR OF
FINISHES 2ND COMPETITOR

HOW TO CHARGE AND START THE WATCH

◆ When you start the watch or when the energy in the rechargeable battery
is reduced to an extremely low level, charge it sufficiently by exposing the
watch to light.
B
RESET
1 Expose the watch to sunlight or strong
artificial light.
When the watch has stopped operating, the second
hand will start moving at 2-second intervals.
2 Keep the watch exposed to the light until
the se cond hand moves at 1- se cond
intervals.
3 When the watch is charged after it has
completely stopped, set the date and
time before wearing the watch.
If the watch is charged by exposing it to strong light
such as sunlight, the power reserve indicator may
not show the remaining power reserve amount
properly. Make sure to charge the watch sufficiently
by referring to "GUIDELINE OF CHARGING TIME/
ACCURACY." (P.25)
21