Hoover H-DRY 500 Manual page 68

This appliances is equipped with Drying

Manager function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the
indicated by flashing the light indicator
corresponding to the degree of drying
reached.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
ANTI CREASE button
During the cycle the option sets alternate

movements of the drum to reduce the
folds and automatically sets the drying
level to "Ready to Iron". Moreover this
option activate an anti-creases movement
of the drum pre cycle in case of activation
of the delay and at the end of drying
cycle. It is activated every 10 minutes, up
to 6 hours after the end of the drying
cycle.
To stop the

programme selector to OFF. Useful when
it's not possible to remove immediately
the laundry.
CHILD LOCK
Pressing simultaneously the buttons "F"

and "G" for about 2 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a cycle.
The key lock can be simply cancelled by

pressing the two buttons simultaneously
again.
In case of opening of porthole with

activated CHILD LOCK, the cycle stops
but the lock is kept: to restart the cycle,
you must remove the lock and press
START/PAUSE again.
CHILD LOCK can be modified at any

time of the cycle.
selected one,
movements set
Display
The display shows the remaining time for
is
drying, the postponed time in case of
delayed start
notifications setting.
1) DRYING SELECTION INDICATOR
LIGHTS
The indicator lights display the degrees of
dryness that can be selected by the
relevant button.
2) ANTI CREASE INDICATOR LIGHT
the
The indicator light shows the selection of
the relevant option.
3) FILTER CLEANING INDICATOR LIGHT
It lights up when the cleaning of the filters is
requested (the door and the lower filter).
4) Wi-Fi INDICATOR LIGHT
On models equipped with Wi-Fi, it

indicates the status of the connection. It
could be:
- FIXED ON: remote control enabled.
- SLOW FLASHING:
disabled.
- QUICK FLASHING FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been associated with the App.
- SLOW BLINKING FOR 3 TIMES, THEN
OFF FOR 2 SECONDS: reset of the Wi-Fi
network (during the association with the App).
68
selection and
remote control
other