Advertisement
Step 2:
Slip-in the washer M8 (5) – 2 off, nuts
M8 (6) – 2 off, and secure the threads.
Copyright By SRC
Design and Specification are subjected to change
Step 1:
Orient, Mount and Fit the Top Rack
(1) to the Motorbike Chassis frame
(as show)
Slip-in the Spacer delin (4)-2 off,
Bush 18x18 (3)-2 off, at the end rack
in motorbike. and slip-in Bush
25x29(2)-2 off, as shown .
Orient the Top rack (1) and slip-in
the taper ring (9) - 4 off, screw
M8x55 (7) – 2 off, at the end top
rack, screw M8x60 (8) – 2 off,
Page 2
Advertisement
