Change General Settings; Change Audio Settings; Change Video Settings - Philips Hts2501/94 Manual

Change general settings

1
Press SETUP.
2
Select [General Setup], then press OK.
3
Select and adjust the following settings:
• [OSD Language] : Selects the on-
screen display menu language.
•
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to confirm your choice.
Note
•
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.

Change audio settings

1
SETUP.
Press
2
Select [Audio Setup], then press OK.
3
Select and adjust the following settings:
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
4
Press OK to confirm your choice.

Change video settings

1
Press SETUP.
2
Select [Video Setup], then press OK.
3
Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to fit the TV screen.
• [Screen Fit] : Selects a full screen
format that best fits to the TV screen.
• [Picture Settings] : Selects a
predefined color setting.
•
[Progressive] : Enables or disables
progressive scan mode.
4
Press OK to confirm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
EN
11