Summary of Contents for Fine Audio Instruments ECI1
Page 1
ECI1 DUAL MONO INTEGRATED AMPLIFIER Owner’s Manual WARNING: To reduce risk of fire or ele c t r i c s h o ck , d o n o t ex p o s e t h i s a p p l i a n c e to rain or moisture. Ver ify line voltage before use.
Page 2
Welcome to the world of Electrocompaniet We sincerely thank you for selecting an amplifier from Electrocompaniet. We hope you will enjoy years of listening pleasure and true high end musical performance from your audio system. Kindly read this owners manual to familiarise yourself with the set before operation.
Page 3
The design features of Ampliwire ECI 1 After the Electrocompaniet 25 watt amplifier had established a new standard for transistor amplifiers, research was undertaken to find ways to make the amplifier even better, and to extend its highly musical sound quality to more powerful amplifier designs.
Page 4
Unpacking the amplifier: Immediately upon receipt of the amplifier, inspect the carton for possible damage during shipment. If the carton is visibly damaged, a claim must be filed with the car- rier as soon as possible. Unpack the unit carefully, and please do remember to save all packaging materials for future shipment.
Page 5
Operating instructions: How to turn on your system You should always turn on your equipment in this order: Signal source devices (CD, tuner, etc) are turned on first. Allow 30 seconds of preheating before you turn on your amplifier.When turning your system off, you should start by switching off your amplifier and finally your signal source devices After switching on the amplifier, there will be a 5 seconds delay before the speakers...
Page 6
Service Policy: When service is needed Your dealer will have all relevant information about the service centers in your area, and will ensure that your unit is serviced without delay. It is our general policy to have your amplifier returned to you within 5 working days. This is an average time, and could vary locally, depending on the work load at the service center.
Page 7
Technical Specifications ECI 1 : The following technical data were measured on randomised test objects and are typical data. All measurements are made with the following equipment: Distortion analyser: Tektronix AA501 Oscilloscope: Tektronix 468 Oscillator: Tektronix SG505 Frequency counter: Rascal 9838 Phase meter: Hewlett Packard 3575A Preamplifier section...
Need help?
Do you have a question about the ECI1 and is the answer not in the manual?
Questions and answers