10
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Place the screen face down.
CAUTION
y
To protect the screen from scratches, cover
the surface with a soft cloth.
2
1
Turn the screw to the left.
2
Pull out the Stand Base.
Stand Body
2
Stand Base
3
As shown in the illustration,put your hand on
the right groove of cable holder, pull cable
holder out to separate it from the set.
Cable holder
4
Remove the two screws on the back of stand
body.
As shown in the illustration, disconnect the
stand body from the stand hinge.
Screws
Stand Hinge
Stand Body
CAUTION
y
Illustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
y
If you use the monitor panel without the
stand base, its joystick button may cause
the moni-tor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.