Table of Contents
Advertisement
GPS200 User's Manual
PGN 129025 – Position, Rapid Update
The GPS200 uses this PGN to provide latitude and longitude referenced to WGS84. The factory
default for periodic transmission rate is 10 times per second. The transmission of this PGN can
be disabled or the transmission rate of this PGN can be changed (see PGN 126208 – NMEA
Request Group Function – Transmission Periodic Rate).
Field 1: Latitude – Latitude in 1x10
2: Longitude – Longitude in 1x10
PGN 129026 – COG and SOG, Rapid Update
The GPS200 uses this PGN to provide Course Over Ground (COG) and Speed Over Ground
(SOG). The factory default for periodic transmission rate is four times per second. The
transmission of this PGN can be disabled or the transmission rate of this PGN can be changed
(see PGN 126208 – NMEA Request Group Function – Transmission Periodic Rate).
Field 1: SID – The sequence identifier field is used to tie related PGNs together. For example,
the GPS200 will transmit identical SIDs for 126992 (System Time), 128259 (Speed),
129026 (COG and SOG, Rapid Update), 129029 (GNSS Position Data), 129539
(GNSS DOPs), and 129540 (GNSS Satellites in View) to indicate that the readings
are linked together (i.e., the data from each PGN was taken at the same time although
they are reported at slightly different times).
2: COG Reference – This field is used to indicate the direction reference of the course
over ground. This field always reads as 0 (True, not magnetic).
3: Reserved (6 bits) – This field is reserved by NMEA; therefore, this field always
contains a value of 0x3F (the GPS200 sets all reserved bits to a logic 1)
4: Course Over Ground – This field is used to indicate the course over ground (COG) in
resolution of 1x10
5: Speed Over Ground – This field is used to indicate the speed over ground (SOG) in
resolution of 1x10
6: Reserved (16 bits) – This field is reserved by NMEA; therefore, this field always
contains a value of 0xFFFF (the GPS200 sets all reserved bits to a logic 1)
PGN 129029 – GNSS Position Data
The GPS200 uses this PGN to convey a comprehensive set of Global Navigation Satellite
System (GNSS) parameters, including position information. The factory default for periodic
transmission rate is once per second. The transmission of this PGN can be disabled or the
transmission rate of this PGN can be changed (see PGN 126208 – NMEA Request Group
Function – Transmission Periodic Rate).
Field 1: SID – The sequence identifier field is used to tie related PGNs together. For example,
the GPS200 will transmit identical SIDs for 126992 (System Time), 128259 (Speed),
129026 (COG and SOG, Rapid Update), 129029 (GNSS Position Data), 129539
(GNSS DOPs), and 129540 (GNSS Satellites in View) to indicate that the readings
are linked together (i.e., the data from each PGN was taken at the same time although
they are reported at slightly different times).
2: Position date –UTC Date in resolution of 1 day (The number of days since January 1,
1970).
3: Position time – UTC Time in resolution of 1x10
4: Latitude – Latitude in 1x10
5: Longitude – Longitude in 1x10
Page A2 Appendix A – NMEA 2000
degrees ("-" = south, "+" = north)
-7
degrees ("-" = west, "+" = east)
-7
-4
radians.
-2
m/s.
degrees ("-" = south, "+" = north)
-16
degrees ("-" = west, "+" = east)
-16
®
Interfacing
-4
s (24 hour clock, 0.0000 = midnight).
Revision 1.3
Advertisement
Table of Contents
