Table of Contents
Advertisement
50
2
Enter code to connect with IFP. As is shown in picture 4-2-2, PC device is ready for mirroring.
3
Click
to enter mirroring mode. Make adjustment if needed.
•
Stop mirroring. Click
•
Disconnect. Click
•
Adjust resolution. Click
•
Receiver operation. Click
•
Keep aspect ratio. Once enabled, only one client device could mirror with IFP in full-screen.
Picture 4-2-2 PC Client Ready for Mirroring
Picture 4-2-3 PC Client Device Mirroring Successfully
so that client devices will not mirror with IFP.
to disconnect client devices from server and go back to main interface.
to switch between different mirroring resolution.
to enable server devices to remotely control client.
Advertisement
Table of Contents
